Bought a frame and V5 as the basis for building an ELR on the 10th November 2013.

I had already picked up a full body kit (Tank, Side Panels, Front Mudguard, Front and Rear Cowling) from eBay along with a main stand and chain-guard…all NOS and in perfect condition…. Yes they were expensive.

Added a couple of Davida Swing arms to the collection… but…. I also managed to find an original one….so I have a choice to make…Think I will go with the original one to start and see what happens.

When I picked up the frame the seller also had a whole bunch of bits to go with the frame, which I went back and purchased a month later.

I decided to dry build the bike and work out what bits I needed to complete.

Did a bit of eBay shopping for some missing parts, but managed to get all the bits I needed and more.

Pictures below show the bike and bits as I got them and then the dry build, must admit it didn’t take as long as I thought it would.

P1180063P1180062P1180061P1180060P1180059P1180058P1180057P1180056P1180055IMG_0653IMG_0652   IMG_0635IMG_0634IMG_0633IMG_0631IMG_0630IMG_0629IMG_0628

DSCF3184DSCF3183DSCF3182DSCF3181DSCF3180DSCF3179DSCF3178DSCF3177DSCF3176DSCF3175DSCF3174DSCF3173DSCF3172DSCF3171  IMG_0653

IMG_1331IMG_1330IMG_1329IMG_1328IMG_1327

Found some nicer wheels..

IMG_0658   IMG_0654

Managed to pick-up a genuine z1000r engine, that’s been rebuilt and slight over sized.

So I started to piece together the jigsaw…..

IMG_0593IMG_0592IMG_0591DSCF3170DSCF3169DSCF3168DSCF3167DSCF3166DSCF3165DSCF3164DSCF3163DSCF3162DSCF3161DSCF3160IMG_0861IMG_0637IMG_0640IMG_0862IMG_0860IMG_0641IMG_0870IMG_0869IMG_0868IMG_0867IMG_0866

Had some fun with the battery box and associated bits. So had to strip, check and rebuild, was a little rusty, but noting that cannot be fixed.

DSCF3201DSCF3200DSCF3199DSCF3198DSCF3197DSCF3196DSCF3195DSCF3194DSCF3193DSCF3192DSCF3191DSCF3190DSCF3189DSCF3188DSCF3187DSCF3186DSCF3185 DSCF3201

But all cleaned up and put back together…and fitted back into the frame

DSCF3216DSCF3215DSCF3214DSCF3213DSCF3220DSCF3219DSCF3218DSCF3217

Sent a load of bits of to Redditch Shotblasting and Powder Coating….another great job…All done in Satin Black..

DSCF3206DSCF3205DSCF3204DSCF3203DSCF3202

Sorted out the bits that needed chroming and boxed them up and sent to AC Howells in Walsall once again..

IMG_1334IMG_1333IMG_1332

Started putting some of the newly powder-coated bits back onto the bike….

DSCF3212DSCF3211DSCF3210DSCF3209DSCF3208DSCF3207

Including the tail piece and grab rail..

DSCF3224DSCF3223DSCF3222DSCF3221

So that’s it onto the rebuild full steam ahead…..more to follow..